This RAM Mounts Form-Fit Holder (Key Lock) fits the Getac ZX70 Rugged Tablet. Cutouts on buttons and ports allow you to continue using them without any problems. RAM Vent-Temp can use vehicle vents to direct hot or cold air to the Getac ZX70. The back of the device stand is prepared to support a round ball base (not included). KickstandEasy insertion and removalStylus holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-TempLockable with keyAdditional information: The devices shown are not included in delivery.Only the RAM-HOL-GE3FKLU holder is included.

The RAM Mounts GDS Uni-Conn Spring Mount is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter.
The spring-loaded quick-release mechanism holds your device in place while allowing fast charging via the built-in pogo pins, with power delivered via a USB-C connection.
The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the IntelliSkin enclosure designated for use with this dock.
To place the device with the IntelliSkin case in the dock, the GDS Uni-Conn adapter must be inserted into the octagonal connector and pushed upwards until the bottom can be inserted into the dock.

Product Features RAM Brackets RAM-GDS-DOCK-V12-U1CPU:
Compatible only with IntelliSkin and Uni-Conn adapters
Easy insertion and removal
Charging function
Input connector: USB-C
Output power: 15W
Output voltage: 5V-12V at 3A
Input Cable Length: Approx. 100 millimeters
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

The devices shown are not included in delivery.
Only RAM-GDS-DOCK-V12-U1CPU support is provided.

The RAM Mounts GDS Uni-Conn is a specially designed universal docking station for devices in a protective IntelliSkin case with a Uni-Conn adapter.
This Snap-In mount holds your device securely while enabling fast charging via built-in Pogo-Pins, with power delivered via a USB-C connection.
The docking and undocking process is simple:
Insert the tablet with the IntelliSkin protective case and the mounted GDS Uni-Conn adapter into the dock base and push it backwards until it clicks into place.
To remove it, simply press the lever to release the tablet.
For the dock to work, the Uni-Conn GDS Adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case.
Currently, the following devices are compatible with this fixed docking height:
Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3 and Tab A9+.
This media provides a reliable solution for loading and transferring data between various applications.

Product Features RAM Brackets RAM-GDS-DOCK-U1CPU:
Compatible only with IntelliSkin and Uni-Conn adapters
Snap-In function
Easy insertion and removal
Charging function
Input connector: USB-C
Output power: 15W
Output voltage: 5-12V at 3A
Input Cable Length: Approx. 215 millimeters
Product dimensions:
Overall width: 8.02 cm
Overall height: 21.44 cm
Overall depth: 7.70 cm
Weight: approx. 223g
Additional information:
The stop lever included with this dock is required to operate properly.
The warranty on the dock is void if the dock is used without a lever stop.

GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

The devices shown are not included in delivery.
Only RAM-GDS-DOCK-U1CPU support is provided.

This RAM Mounts GDS holder is suitable for Zebra TC73 & TC78 with the IntelliSkin protective sleeve. The stand is powered by a USB-C port and charges the device in the dock. To insert the device, pull the top of the cradle up, insert the appropriate device. The spring-loaded design holds the device firmly and securely in the cradle and is also charged. While keeping the Zebra TC7x secure, the powered dock also leaves the device's top scanner and buttons exposed and usable. The space available in the back can also accommodate standard and extended batteries as well as the Zebra wrist strap. RAM-GDS-DOCK-V12-ZE35CPU: Only compatible with IntelliSkin protective sleeveSpring-loaded design for easy insertion and removalBuilt-in stylus holderCharging functionInput connector: USB-CInput cable length: approx. 100 cmAdditional information: To use the holder, you need the RAM-GDS-SKIN-ZE35-NG protective sleeve. The devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE35CPU holder is included.

This RAM Mounts GDS EZ-Roll'r holder fits Zebra ET4x 10" series with IntelliSkin Next Generation protective case. The holder is powered by a USB-C port and charges the device in the dock. To insert the device, place the bottom of the device in the holder and press it into the holder until it clicks into place. The cutouts on the buttons and ports allow you to continue using them without any problem. The stand also allows tablet scanning The back of the device stand is prepared to support a 75 x 75 mm VESA base or a round ball base (not included) Output power: 60W Output voltage: 5-20V @ 3A Input cable length: approximately 21 cm Certifications: RoHS, WEEE, CE & UKCA Additional information: To use the stand you have need the protective sleeve RAM-GDS-SKIN-ZE21C-NG.Devices shown are not included in delivery.Only the RAM-GDS-DOCK-ZE21PU holder is included.

This RAM Mounts GDS EZ-Roll'r holder fits the Zebra ET4x 8" series with IntelliSkin Next Generation protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while support for peripherals is provided by the integrated USB Type-A cable. To insert the device, place the bottom of the device into the holder and press it into the holder until it clicks into place. Cutouts on the buttons and ports allow you to continue using them without any problems. The stand also allows you to continue using the scanning function of the tablet thanks to the cutout on the back. Tablet accessories such as PowerPack batteries can also be stored inside. The back of the device stand is prepared to support a 75x75 mm VESA base or a round spherical base (not included). Product features RAM mounts RAM-GDS-DOCK-ZE20PDU: Compatible with PowerPack battery Easy insertion and removal Additional mounting plate for attaching additional devices or accessories Can only be used with IntelliSkin Next Generation protective sleeve Input connector: USB-C Output power: 60 W Output voltage: 5-20 V at 3 A Output connector: USB-A 2.0 (peripheral output - 500 mAh)Transfer speed: 12 MbpsInput cable length: approx. Protective cover RAM-GDS-SKIN-ZE20C-NG.Devices shown are not included in delivery.Only the RAM-GDS-DOCK-ZE20PDU holder is included.

This RAM Mounts GDS EZ-Roll'r holder fits Zebra ET4x 8" series with IntelliSkin Next Generation protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the holder and press it into the holder until it clicks Snaps into place. Cutouts on the buttons and ports allow you to continue using them without any problems. The stand also allows you to continue using the tablet's scanning function thanks to the cutout on the back. Tablet accessories such as PowerPack batteries can also be stored inside. The back of the device stand is prepared to support a VESA 75x75mm or round spherical base (not included). Product Features RAM Mounts. RAM-GDS-DOCK-ZE20PD2U:Compatible with PowerPack batteryEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with the IntelliSkin Next Generation protective sleeveInput connector: USB-CPower output: 60 WOutput voltage: 5-20 V at 3 AOutput connector: 2x USB-A 2.0 (peripheral output - 900 mAh per port)Transfer speed: 12 MbpsInput cable length: approx. To use the holder, you need the RAM-GDS-SKIN-ZE20C-NG protective case. Only the RAM-GDS-DOCK-ZE20PD2U holder is included.

The GDS® Modular Wired Charger is the ideal solution for powering any GDS® USB Type-C vehicle solution.
By connecting directly to your vehicle's power source, the GDS® Charger delivers up to 9V of USB Type-C power to your device.
When it comes time to upgrade, avoid any rewiring by simply unplugging the power connector and connecting the new charger components.
This charger does not support Power Delivery.

Product Features RAM-GDS-CHARGE-V7CU:

Input voltage: 10-30 V DC
Output voltage: 5.42-9 V DC
Output current: 2.5A max.
Input connector: USB Type-C (male)
Input Cable Length: Approx. 250cm
Output Cable Length: Approx. 100cm
Operating temperature: -10°C - +70°C
Storage temperature: -40°C - +70°C
Built-in overvoltage, short circuit and reverse polarity protection
Certifications - FCC, CE, UL62368-1, RCM, SAE J-1113-5, WEEE, e-Mark and RoHS

Additional information: This charger does not support Power Delivery. For a Power Delivery version, see RAM-GDS-CHARGE-V3C-2U

The GDS® Modular Wired Charger with 5.5mm Male DC Cable is the ideal solution for powering any RAM® or GDS® DC powered docking station.
When it comes time to upgrade, avoid any rewiring by simply unplugging the power connector and connecting the new charger components.
This wired charger has a 10-30V DC input, making it ideal for most vehicle applications.

Product Features - RAM-GDS-CHARGE-V10U:

Input voltage: 10-30 V DC
Output voltage: 12 V DC
Output current: 3.5A max.
Input Connector: 5.5mm OD x 2.5mm ID male barrel connector
Input Cable Length: Approx. 120cm
Output Cable Length: Approx. 20cm
Operating temperature: -10°C - +70°C
Storage temperature: -40°C - +70°C
Built-in overvoltage, short circuit and reverse polarity protection
Certifications - FCC, IC, UKCA, CE, RCM, WEEE, E-Mark, RoHS, 18AWG, IP66 and SAE J-1113-5a

RAM Mounts Mounting Set - B-Ball (1 inch), 2x Round Base Plate (AMPS), Long Link Arm

RAM Mounts Diamond Base Plate (Trapezoid) - 1 Inch B Ball, 2-Bolt AMPS Hole Grid

RAM Mounts Suction base kit with diamond connection - long connection arm, 2x diamond base plate (trapezoid), ball B (1 inch), in poly bag

RAM Mounts Diamond Connection Suction Cup Base Kit - Center Connection Arm, 2 Diamond Base Plates (Trapezoid), B Ball (1 Inch), in Poly Bag

VESA RAM Mounts Plate (120.7 x 120.7 mm) - Sphere D (2.25 inch), 75x75 and 100x100 mm hole pattern, includes 4x RAP-WASHS2

RAM Mounts Diamond Base Plate (Trapezoid) - C-Ball (1.5"), in Poly Bag

label printer, thermal transfer, resolution: 12 pts/mm (300 dpi), media width (max.): 172.7 mm, print width (max.): 168 mm, roll diameter (max.): 203 mm, speed (max.): 305 mm/s, USB (2.0), RS232, Ethernet, RAM: 512 MB, flash: 128 MB, high-performance cutter, sensor black mark, gap detector, included: power supply (internal), power cord (EU)

label printer, thermal transfer, resolution: 8 pts/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, roll diameter (max.): 203 mm, speed (max.): 356 mm/s, USB (2.0), RS232, Ethernet, RAM: 512 MB, flash: 128 MB, black mark detector, detector of spaces, included: power supply (internal), power cord (EU)

label printer, thermal transfer, resolution: 12 pts/mm (300 dpi), medium width (max.): 114 mm, print width (max.): 104 mm, roll diameter (max.): 203 mm, speed (max.): 305 mm/s, USB, RS232, Ethernet, RAM: 512 MB, flash: 128 MB, black mark detector, gap detector, included: power supply (internal), power cord (EU)

label printer, thermal transfer, resolution: 8 pts/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, roll diameter (max.): 203 mm, speed (max.): 356 mm/s, USB, RS232, Ethernet, RAM: 512 MB, flash: 128 MB, black mark detector, gap detector, included: block power supply (internal), mains lead (UK)

label printer, thermal transfer, resolution: 8 pts/mm (203 dpi), media width (max.): 114 mm, print width (max.): 104 mm, roll diameter (max.): 203 mm, speed (max.): 356 mm/s, USB, RS232, Ethernet, RAM: 512 MB, flash: 128 MB, black mark detector, gap detector, included: block power supply (internal), power cord (EU)